What should be paid attention to during the use of Multi-line cutting fluid?
Publish Time: 2024-06-21
Multi-line cutting fluid plays a vital role in machining. It can not only effectively cool the tool and workpiece, but also play a role in lubrication and cleaning. However, in order to ensure its optimal performance and extend its service life, the following points should be noted during use:
Dilution and mixing: Multi-line cutting fluid usually needs to be diluted with water before use. During the dilution process, it is important to follow the recommended concentration ratio to avoid being too concentrated or too thin. In addition, deionized water or soft water should be used for dilution to reduce the impact of impurities on the performance of the cutting fluid.
Flow and pressure: The flow of the cutting fluid should be sufficient and there should be a certain pressure to ensure that the cutting fluid can fully cover the cutting area. This helps to reduce the cutting temperature and improve the processing quality.
Continuous pouring: When cutting with carbide tools, the cutting fluid must be poured continuously and fully from the beginning. This is because carbide blades are prone to cracks when they are suddenly cooled, and continuous pouring can avoid this from happening.
Cleaning and maintenance: The cutting fluid should be kept clean during use, and metal chips, dust and other impurities should be cleaned regularly. At the same time, the storage containers and pipelines of the cutting fluid should also be kept clean to avoid contamination of the cutting fluid.
Concentration and pH monitoring: The concentration and pH value of the cutting fluid are important factors affecting its performance. The concentration parameters of the cutting fluid should be tested regularly with a refractometer, and its pH value should be tested with a pH test paper or a pH meter. Ensure that the concentration and pH value of the cutting fluid are within the recommended range to ensure its optimal performance.
Antibacterial treatment: In a high temperature environment, bacteria are easy to breed and affect the performance of the cutting fluid. Therefore, it is necessary to regularly perform antibacterial treatment on the cutting fluid to prevent bacterial growth and extend the service life of the cutting fluid.
In summary, Multi-line cutting fluid needs to pay attention to dilution and mixing, flow and pressure, continuous pouring, cleaning and maintenance, concentration and pH monitoring, and antibacterial treatment during use. Only in this way can the optimal performance of the cutting fluid be ensured and its service life be extended.
