The service life of special cutting fluid for aluminum products is a relatively complex issue because it is affected by many factors. The following is a detailed explanation of the service life of special cutting fluid for aluminum products:
1. Overview of service life
The service life of special cutting fluid for aluminum products does not have a fixed time range. It usually depends on many factors such as the quality of the cutting fluid, storage conditions, usage methods, and processing environment. The cutting fluid will gradually lose its original properties during use, such as lubricity, cooling, cleaning and rust prevention. When these properties are reduced to a certain extent, the cutting fluid needs to be replaced.
2. Factors affecting service life
Cutting fluid quality: High-quality cutting fluids usually have a longer service life. These cutting fluids are more reasonably formulated and can more effectively resist oxidation, corruption, and bacterial growth.
Storage conditions: The storage conditions of the cutting fluid also have an important impact on its service life. The cutting fluid should be stored in a cool, dry, well-ventilated place, avoiding direct sunlight and high temperature environment. At the same time, the cutting fluid should be kept away from oxidizing substances and pollutants to prevent it from being contaminated and accelerating deterioration.
Usage: The way the cutting fluid is used will also affect its service life. For example, the concentration, amount of addition, replacement frequency and mixing with other substances of the cutting fluid will affect its performance. Correct use of cutting fluid can extend its service life, while incorrect use will accelerate the deterioration of the cutting fluid.
Processing environment: The processing environment is also an important factor affecting the service life of the cutting fluid. In a harsh processing environment, the cutting fluid is easily contaminated and corroded, which accelerates its deterioration process.
3. How to extend the service life
In order to extend the service life of Special cutting fluid for aluminum products, the following measures can be taken:
Regular testing: Regularly test various indicators of the cutting fluid, such as pH value, concentration, oleic acid value, etc., to timely detect changes in the performance of the cutting fluid and take corresponding measures.
Correct storage: Store the cutting fluid in a cool, dry and well-ventilated place, avoid direct sunlight and high temperature environment. At the same time, the cutting fluid should also be kept away from oxidizing substances and pollutants.
Reasonable use: Use the cutting fluid correctly according to the instructions for use of the cutting fluid, and avoid excessive addition or mixing with other substances. At the same time, the cutting fluid should be replaced regularly to ensure its stable performance.
Maintenance: Regularly maintain the cutting fluid system, such as cleaning the filter, replacing the cutting fluid, etc., to keep the cutting fluid system clean and operating normally.
In summary, the service life of special cutting fluid for aluminum products is affected by many factors, but through correct storage, use and maintenance measures, its service life can be extended and its use effect can be improved.
